calibrate the digital weight scale

How to calibrate the digital weight scale

Generally, a digital weight scale is the easiest tool to use for measuring the weight. In common fact, it is very much easier to read the digital readings than the wobbling dial. However, the digital weight scales have to be calibrated every few months as with all other scales. Many users are having doubts on scale calibration with the digital measurements. Calibrating a digital weight scale is so important in order to keep it reading accurately. Most of the new age digital scales are now coming pre-calibrated from the manufacturers. But with usage, time, and way of handling, its digital reading can drift slightly. Thus, it is highly important to calibrate a digital weight scale in the proper interval.

Steps to calibrate the digital weight scale:

Make preparations – Before beginning any calibration routine to the digital weight scale, it is always essential to turn on it and let it warm up. In addition, it is also too significant to use only the objects with the exact weight for this calibration routine. It is totally useless to have an approximation weight when you are targeting to get precision.

Start calibration mode – You have to locate a calibration button on the digital weight scale. It usually carries one of the following prints such as function, cal, cal/mode, or mode. After that, you need to press this button down until the digits shown on the scale turn to cal, 0, or 000. At this point, your digital weight scale must be in the calibration mode.

Performing the calibration test – Testing the calibration is the next step on scale calibration to make its reading accurately. Once your digital weight scale is in the calibration mode, you can put your known weighted objects collected in the step one. Ideally, you must put down many numbers of objects which amount to roughly 30 pounds. This is why your scale will have a balanced weight to calibrate on. You have to make sure that you have placed nearly 3 pounds weight worth of objects on the scale and don’t move anyone. All such objects should be placed at the centre part of the digital weight scale to get the most exact readings.

Calibrate – In this step, you have to allow a digital weight scale to take in the measurement. Just wait for 5 minutes, and you can press the scale calibration button once more to end the session. Once this process is over, you will get words such as end, cal, or 0 displayed on the screen.

Most of the modern digital weight scales automatically reset after the calibration is finished. If it is not occurred in this case, you are recommended to switch off your digital scale and leave it switched off for about two minutes. Through this time, a digital scale resets itself after the calibration. After that, you can turn on the digital scale switch, and now you will get the accurate results.

Share Button

Leave a Reply